The MX10R-H is a miniature micromanipulator that is ideal for position-ing applications that require submicron level resolution. In this design, we have combined our DT100 series stages with the MX610 single-axis hydraulic manipulator. This combination enables the experimenter to use the fine positioning accuracy of the dovetail stage to get close to the desired location and then use the submicron resolution of the hydraulic stage to make the final adjustment. The hydraulic stage is mounted on a fourth axis which can be set at any angle through 360° of motion. The compact size of the MX10R-H makes it ideal for stimulator applications, puffer pipettes or micro-injection set-ups.
- Dovetail 3-axis stage with single hydraulic axis, rh
- 5-mm hydraulic linear approach on probe axis
- 10-mm travel in XYZ axes
- Dovetail mounting rail for easy removal or replacement
- Holds mounting rods from 3- to 10-mm in diameter.
- Maximum load: 0.5 lbs
Travel / axis
- Dovetail axes: 0.39 inch [10 mm]
- Hydraulic axis: 0.2 inch [5 mm]
Minimum controllable motion
- Dovetail axes: 5 μm
- Hydraulic axis: 0.5 μm
*MINIMUM CONTROLLABLE MOTION BASED ON 1° OF ROTATION
Hydraulic mechanism maintenance
Hydraulic manipulators come with a two-year warranty on the hydraulic drive. They will be refilled at no charge in the first 24 months. There is a nominal refilling fee after that.
|Manual / Motorized||HYDRAULIC|
|Open / Closed Loop||No|
|Degrees of Adjustment||No|